Defuse The Bomb

Section 1: Cut the Correct Wires

Here are all the possible Symbols for the Wires:

Analyze the wire symbols before cutting and follow the following rules:

1. If there are exactly 2 A Wires and 2 B Wires
   • Cut all other Wires (DO NOT CUT A OR B)
   • You can cut the wires in any order
2. If there are exactly 3 B Wires
   • Cut all C Wires
3. If there are exactly 2 D Wires
   • You can both of them
4. If there are exactly 3 E Wires and exactly 3 B Wires
   • Cut all B and E wires in any order
5. If all wire types are present in equal quantity of 2
   • Cut all C Wires

Section 2: Input the correct pin

The PIN is encoded in Morse Code by the LED next to the Pin Pad. You should be able to see LED Blinking. If they are not blinking, try interacting with the button underneath the LED light. It should send the message one more time.

If you don’t know what a Morse Code is,a telecommunications system encoding text as sequences of short (dots) and long (dash) signals. If the light blinks for a short time, it indicates that it's a dot, if the light blinks for a long time, it is a dash.

What you should do:

1. Translate the Morse symbols into numbers.
2. Enter the numbers in the order they appear.
3. Incorrect input will immediately trigger detonation.

You can follow the following Morse Code diagram:

Section 3: Press the button at the right order

In this section, you will need to analyze the symbols presented on each buttons. There will be a correct order that you need to press for the buttons. 

You will need to figure out which rows the symbols are from. Then you will need to press the order from left to right. In a case where the symbols exist in different rows, press from the top row symbols then the bottom symbols.

The order will be based on the diagram below: